+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Any good aftermarket parts outlets in the US?
myko2
Posted on: 2004/7/6 16:34
Hard to find parts for the A series motors here. Any ideas?
 
#2
Re: Any good aftermarket parts outlets in the US?
B210sleeper
Posted on: 2004/7/6 18:18
what kind of parts are you looking for. there are some parts around, www.nismoparts.com/ has a 210 performance section and they still have parts.
I see you are in burbank too! I work in burbank over by the cost-co.
#3
Re: Any good aftermarket parts outlets in the US?
myko2
Posted on: 2004/7/6 22:49
Main thing at this point is dual valve springs. I tried contacting Crane, but they dont return my calls. I had a set from my cam grinder, but they were a hair too big in diameter so they were binding. I am running stock ones at the moment. I think I need more pressure for the cam im running.
#4
Re: Any good aftermarket parts outlets in the US?
B210sleeper
Posted on: 2004/7/6 23:02
Nismo parts for datsun 210's
did you try www.datrats.com.au? they might have something. I know i's not in NA but they seem to have good items. have you tried the datsun 210 group on yahoo? there are mor people in the US on there and they might know of a source for the valve springs... I'll ask.
#5
Re: Any good aftermarket parts outlets in the US?
ang94541
Posted on: 2004/7/7 0:07
Jegs - example valve springs
I'm not positive, but I think my valve springs are the SB chevy 1.255 OD size. The guy who rebuilt my head cut the valve spring seats a little wider to fit. Modified just slightly for more readily available parts. edit- Crane Cams not for A series, but close edit again  - This is what happens when I respond without reading all the posts.You may be able to enlarge the valve spring seats or base to fit the Outside Diameter of the springs your cam grinder recommended.
#6
Re: Any good aftermarket parts outlets in the US?
B210sleeper
Posted on: 2004/7/7 1:34
Since you are in Southern California...there are 2 places you can get
them from...One is on Broadway St. in Gardena...right in the corner Isky cams and the other one is by the Ventura Freeway...Damn...I can't remember exactly their address at the moment...But I'll post it by tommorrow afternoon! Leosnake > from datsun210 - group on yahoo
#7
Re: Any good aftermarket parts outlets in the US?
leosnake_2000
Posted on: 2004/7/7 1:46
Damn B210sleeper...you must have DSL and have 2 navigator windows open at the same time...I had just typed that message not more than a minute ago!!
 Quote:
#8
Re: Any good aftermarket parts outlets in the US?
ddgonzal
Posted on: 2004/7/7 4:17
Have you seen the Parts Sources article?
#9
Re: Any good aftermarket parts outlets in the US?
B210sleeper
Posted on: 2004/7/7 18:22
heh.. actually I do, Safari on a dual head mac, so i have 4 windows each with many tabs and email too.
#10
Re: Any good aftermarket parts outlets in the US?
leosnake_2000
Posted on: 2004/7/7 20:50
Well here is the information for locating A-series parts in the Los Angeles County:
Top End Performance 7452 Varna Ave. North Hollywood, CA 91605 818-764-1901 I bought my springs and stainless steel valves off of them...I also had them do the machine work on one of my A14 and L24 cylinder heads. 
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
