as the title says
What brake booster is the best fit and is quite easy to install.As i'm about to put a S13 front end in and a R31 skyline diff(boath of which are disks) Its just that everyone I've talked to points me in a different direction

Thanks Michael

the la-lb lancer brake booster bolts straight up to the firewall, and the brake pedal, all u need is to get some brake lines made up, im in the rpocess of fitting the same to my 1200 ute.

YepI have a Lancer booster and a 120Y dual system M/C in mine

i source a lancer booster yesterday but im confused on what mc to use. lancer one is apparently to small. brake bloke said i need at least a 7/8 bore mc. what size bore on the 120y mc?

ive got a brand new 120y dual system M/C and a 180B booster in my car

can you bolt the 1200 M/C onto the lancer booster?

just get a sunny master cylinder,they're 13/16's & set up for front disc's.or a 260z master cylinder,which is what i have,which is 7/8th's.really,all you need is to go to a competent brake place & tell them what size you want for the master cylinder,they should be able to tell you what to buy.to use the datsun m/c's in a lancer booster,you probably have to do some machining work.the outside diameter of the datsun part is slightly too big for the front of the mitsubishi part.a friend of mine machined down the m/c,but now id get the mitsubishi bit made to suit the m/c.the part i'm referring to is the alloy casting which bolts to the front of the booster,& that the m/c bolts onto.

like b310gx said just use a sunny booster/master cylinder and be happy

and can you guys check your spelling before you post, it looks childish with bad spelling, and gramma .

the comma should come after childish by the way.....and where is your question mark?

I must apologise, I did not realise that our post's were to be published. I will try better in the future to have correct spelling and gramma.

(did I get all that right?)