I'm restoring a 1000 ute at the moment. its running an A14 and dellow 5spd. The clutch is sticking on when pressed so I guess it needs a clutch done. Would standard replacement A14 one do or is a special one needed cause of the dellow??Cheers..

you need a toyota clutch plate and a datsun pressure plate.Greg.

SLY OLD FOX....................

Thnks mate, much appreciated..

What ive done is use a toyota sprinter clutch plate and pressure plate

had the local machine shop redrill my fly wheel and I had to shorten the bolts as they came out behind the ring gear I also got the machine shop to fit bigger dowl pins
this made up for the shorter bolts

now i have a very big clutch read same outside diameter as flywheel

i got a new clutch plate to suit for $110 from dellow (i dont think you can use the standard toyota one??????????)

and used the pressure plate from an a-15 heavy duty clutch pack (PBR) which cost $100

but i already had the clutch pack, maybe cheaper just to get the pressure plate and thrust bearing