Hi

Do you know if there is any company that does shorter/stiffened front springs for 1973 datsun 1200 Saloon or does anyone has a pair they want to sell? I can't get them here and may have to get them made to order.

Check out the King Springs catalogue

Look under Nissan

King Springs Part No's KDFL-57 (front) & DAT-502R (rear) to lower your vehicle approximately 35mm from factory std height. Rear leafs are different between sedan and coupe.

These coils are designed with an increase in spring rate of approximately 25%.
front springs are $155 plus GST rear are $300 plus GST

Hi Blofly & Teretonga - Many thanks for your help. I guess now it will have to be a costing exercise and get them from OZ or get them manufactured here by special order

What about 240Z rear springs?

Might be easier to source locally.

I think with the z springs you would want stock ones. Aftermarket kings or something would be really stiff.

Might be worth asking on a z forum, someone probably has some sitting around soemewhere

does pedders make them? i got some for my 120Y ( sunny B310 whatever )

pedders only make standard height replacement springs unfortunately

not for the 1200? they make lowering springs for the 120Y

I have just had Pedders lowered springs fitted into the front of my B120 ute, they are lowering the front by at least 20mm, being that i can only assume that they are 120y because they have no listing for the utes..... i knows it's not 30 - 40 mm but still Pedders can supply.

Cheers, Geoff