Hey all i have a a15 as the topic surgests and i was thinking about puting msd on it...i know most of you will say its a waste and the ignition that i have now is enough to do the job...I was searching a while back and i seen some one on here trying to sell his msd setup with dizzy ignition module and coil...i was wondering if any of you had a part number for the dizzy it self...i went onto MSD webs site and looking at the catalouge they only make them for v8 or a VW...which brings me to ask if the VW dizzy fits onto the A series motors. or evevn can i use the bluebird dizzy i have now and wire the msd ignition module up to it...

I hope some one might be able to help Thanks in advance...

I haven't used that box, but i know many others who have, it works fine, it's a little much for a stock engine, but it won't hurt and you'll have all the ignition you'll ever need.

you don't need a different dizzy, but a upgraded coil helps.

i have the accel300+ CDI and it works great, but the controller in the glove box ticks pretty loudly, but on the road you can't hear it.

I've got an new blaster MSD coil you can have for a good price.

Just use a datsun B-310 electronic dizzy,or convert the bluebird (610) or violet (710) dizzy to work with the msd box. Those dizzy's have a two wire magnetic hall effect switch that the msd box can read. Good luck, Larry

those boxes will also take the coil -trigger if you already have a more modern electronic dizzy.

but either way 2 wire or 1 wire they work great.