how do you remove the 120Y coupe sway bar? i have taken out all the bolts but the actual bar goes through other parts of the car (if that makes any sense)
any help please

keep unbolting stuff :)

from memory the things that it goes thru will also unbolt, i used an oxy on mine as i didnt care for the car

swaybar by memory take a wheel off turn full lock one way and the sway bar itself has to spin almost 180 then u have to push it half way through and drop it out the middle
<------- then downits a prick took me half an hour with mine, takes more to put it back in believe me good luck

the sway bay goes through the engine cross member. so im goin to attack them with an angle grinder unless anyone get tell me other wise

doesnt go thru the crossmember does it, are the coupe crossmembers different to sedans??

it should go through the 2 angled brace like things at the front of the car, they are easily unbolted
as i just unbolted one from my sedan that had a big oxy cut in it

it does go through the 2 angle brace things. ive pretty much unbolted every thing but ill have another look.

pretty sure you need to take off the side rods, the frame mounts then the splash guard and pull it out.