i wont to know what front end part out of other car fit in my 1971 1200 ute and what it does i need to make the front end stronger as im running 10 inch wide rims on front with 265s on them

thicker metal in the front guards could help hold the huge flares you will need.....dont think any 1200s came with guards like that though

what sorta stronger parts are you meaning?

mate i have the gaurds and the wheels by stronger i mean thing like steering arns a stuff but i all so wont to know what stanza front end part fit a what the do

have you got a pic of those fattys on the front?
i have 235's on the back of my ute at the moment and they look waaay fat

they are not on at the moment im waiting on the tires to come in and i dont wont them on till i do some front end work

10's on the front!
now thats funny!
mate i have 10's on the back of my datto,i don't see how you could fit them on the front unless they had zero backspacing and all hanging out the sides.
the only reason you would want tyres that big is if you were making it four wheel drive,now that would be cool.

Now I could understand 10" diameter if it was for a category of racing where this might be an advantage, but 10" wide in a 1200, ...... on the front? What are you using on the rear, ... 14" wide rims?

I hope you have done your sums as even 6" wide rims in as little as 14" diameter can cause all sorts of steering lock dramas if one is not carefull with offsets & tyre diameter.

This I gotta see, so looking forward to some pictures.

i hope this dosnt end up like the 17" offset thred

well 10inch wide rims on the front does seem like a pipedream.

10" on the front is HUGE. It would hamper your steering effort more then it would help it wouldnt it? Why so wide?

I remember a 240Z build on classiczcars and he was running 10" wide tyres on the front. Everybody thought he was nuts for running such wide tyres on the front, and that was a much bigger 240Z

I hope your running Power Steering! Thats gotta be a beeutch to steer!