+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
10 psi
rb20
Posted on: 2007/6/24 2:19
do you think a stock a15 can handle 10psi boost without a head gasket shim? keeping in mind i have full programable wolf 3d injection
  
#2
Re: 10 psi
onetwo00
Posted on: 2007/6/24 2:27
i am onto my second a14 running 12 psi. the first one lasted about one and a half years of punnishment which isnt to bad.
but for the next engine i will be downsizing down to 8 or 7 psi
#3
Re: 10 psi
rb20
Posted on: 2007/6/24 2:33
i might be right then i dont drive it that hard.
i replaced the head gasket shim with a slightly thicker one and the power droped by heaps
#4
Re: 10 psi
onetwo00
Posted on: 2007/6/24 2:53
it sounds like it should be alright then. i am going to build the expired engine i have to the tilt so we will eventually see how much boost an A series can handle.
#7
Re: 10 psi
onetwo00
Posted on: 2007/6/24 3:07
have u had yours on the dyno.
i have not yet had mine but am expecting around 120hp mark. 12psi was a demon to drive in the wet..
#8
Re: 10 psi
rb20
Posted on: 2007/6/24 3:10
that souunds about right
before i changed head gasket shims i was getting 112 rwkw but now it has droped to around 65 rwkw but stll pulling 270nms of torque
#9
Re: 10 psi
1200rallycar
Posted on: 2007/6/24 3:49
if the tune is good it should last a longtime
why would you drop compression to only run 10psi... pointless in my opinion
#10
Re: 10 psi
rb20
Posted on: 2007/6/24 4:16
Quote: why would you drop compression to only run 10psi... it was the way i baught it
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
