+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Looking for 1974 b210 rearend
choco
Posted on: 2008/1/14 1:59
Looking for complete working rearend.
and/or pinion seal and bearing to repair mine.. have cash any ideas?? contact livefoodsmoothie@yahoo.com thanks..  
#2
Re: Looking for 1974 b210 rearend
ANGE
Posted on: 2008/1/14 6:04
try your local parts guy.
he should be able to source the pinion seal and bearings for you.
#3
Re: Looking for 1974 b210 rearend
ddgonzal
Posted on: 2008/1/14 6:33
Nissan have pinion bearing and seal.
#4
Re: Looking for 1974 b210 rearend
choco
Posted on: 2008/1/14 15:41
I have talked to 2 independant parts houses and 2 nissian dealers.When we search the database by year/make/model presto the parts come up..however they do not fit the rearend.
The part# on the seal is 38189-18000 NDK 78 this part# has been discontinued by nissian,with no proceeding number I do not have a part# for the bearing. I am wondering if I gotta rare oddball rearend or what.... Also 1 revolution of the tire produces just a hair over 2 turns of the pinion..Anyone know what ratio that makes it? Thanks so far for the help
#5
Re: Looking for 1974 b210 rearend
ddgonzal
Posted on: 2008/1/14 18:54
Sounds like you have an oddball rear axle assembly.
Can you take a picture of the 3rd-member and post it here? Front and back photos.
#6
Re: Looking for 1974 b210 rearend
ddgonzal
Posted on: 2008/1/15 1:30
The USA 1974 B210 rear axle assembly is different from any other B210. So it is not unlikely that somebody has swapped in a newer (or older) one.
Older ones use the same seal. Newer ones use a different seal.
#7
Re: Looking for 1974 b210 rearend
choco
Posted on: 2008/1/16 2:47
Thanks for lookin out
I'll get some pics up as soon as I can. I think its a oddball fer sure..I get 52 mpg on the highway and 38 in town..top speed is 90 mph with a four speed standard. thanks again
#8
Re: Looking for 1974 b210 rearend
choco
Posted on: 2008/1/16 2:50
heres the factory part#
seal 381189-18000 front pinion bearing 38140-18000 rear pinion bearing 38120-18000 if anyone knows of a crossover/aftermarket thanks again
#9
Re: Looking for 1974 b210 rearend
mikeys_toy
Posted on: 2008/1/28 0:34
I have a '75 and a '76 B210 in NW OK. you're welcome to them if you come pull them. Both were just fine with no noise or leaks. both had a low ratio. I will be swapping the one out for an '81, if I can mod it to fit
#10
Re: Looking for 1974 b210 rearend
ddgonzal
Posted on: 2008/1/28 1:14
1975-1982 all use the H150 differential -- you can swap the center sections (pumpkin) to get different ratios.
1971-1974 used the H145, but they say you can swap the H150 pumpkin into them anyways. Theoretically you are supposed to use a 2mm shim where the gasket goes. Details: club wiki, search for Differential
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
