+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
s13 strut conversion
frankthedolphintrainer
Posted on: 2008/10/5 1:55
does anybody know if the standard 1200 outer tie rods can be used when doing the s13 strut conversion or do you need to use the s13 ones. the measurements are the hole size is about 0.5 mm larger on the s13 side than the 1200 ones and the plate is about 2 mm wider.
 
#2
Re: s13 strut conversion
dongdong0507
Posted on: 2008/10/5 3:51
my opinion, drill new holes on the control arm as i did in my B310. i heard that B14 and N15 Sentra/Pulsar front strut is same with S13, but the damper rate is more appropriate than S13 as Sentra is lighter.
#3
Re: s13 strut conversion
frankthedolphintrainer
Posted on: 2008/10/5 4:14
drilling holes wont help because the s13 has bigger holes to start with.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
