ok heres how the story goes
bought my 120y,, rear wheels 15x9.5 ,up and down gutters and over bumps they scrub
front wheels 15x7.5 on full lock they scrub

anyhow while at the wreckers dad spots a set of 15in trx wheels and without measuring the width we take them straight to the powdercoaters

i came home to do a little reading and turns out they probably wont fit inside my front gaurds

also my my stud pattern is 4x84 front and back? they arent the original brakes and there are adaptors on the rear end

i dont know what the plan is from here but if it comes down to it take the adaptor off the back.. and find another set of brakes that use the 4x114 stud pattern?

maybe ill just have to stick it out and see what i can do when the wheels come back from powder coating

if anyone can advise me the best way to go about fixing this situation i would be very appreciative
cheers

Jason

15x9.5 is pretty wide, just flare it and run them, they'd look awesome i rekkon and trx's look crap in my opinion. it's your car though so go for what you want.

7.5 wide is generally too wide for the front.
But if you put 185 tyres on them (stretched JDM look) it might fit OK. Depends on the offset of the wheels.