+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
rotary 1200 coupe, 6 speed.
84ker88
Posted on: 2009/6/14 0:09
hey guys this is my 1200 coupe ive been working on for a while now, finally have all the rust out and got it straight. i have a 12a 6 port and 5 speed to go in its going to be brigeported with a 48mm ida webber extractors, gilmer drive ect. i know it wont be as fast as a ca or sr 1200 but i have a soft spot for rotors thats why i went 12a. all the badge holes, araiel have been welded up. it has remote central locking, power windows, fibreglass dash, door cards, ect. thinking about smoothing out the rear end and going bumberless whats your thoughts on this?
 
#2
Re: rotary 1200 coupe
84ker88
Posted on: 2009/6/14 0:28
having trouble putting up photos, ill try to get them up asap...
#4
Re: rotary 1200 coupe
84ker88
Posted on: 2009/6/14 0:40
i dont know what im doing wrong guys but i cant get the pictures up, is there another way i can do it?
#5
Re: rotary 1200 coupe
hotrocket
Posted on: 2009/6/14 2:03
sounds like a good project, look forward in seeing sum pic's along the way
#6
Re: rotary 1200 coupe
84ker88
Posted on: 2009/6/14 11:10
hope these photos work
Attach file:  datoooo.jpg (33.94 KB) datto rear.jpg (27.25 KB) datto front.jpg (36.72 KB) datto side.jpg (43.42 KB)
#7
Re: rotary 1200 coupe
84ker88
Posted on: 2009/6/20 5:17
removed the battery tray today and the little fuel filter holder, will weld up all the unused holes in the engine bay tommorrow, brought a battey relocation kit yesterday and have a dry cell battery on order, it will be going in the back of the car somewhere. also have a 'rotary coupe' badge that im going to put somewhere maybe in the grille.
Attach file: battery tray.jpg (31.24 KB) battery tray gone.jpg (31.01 KB) some goodies.jpg (35.81 KB) badge.jpg (33.86 KB)
#8
Re: rotary 1200 coupe
DatsAndy
Posted on: 2009/6/20 9:21
Sweet mate. So If i may add If the motors not mounted i would suggest setting it all up in there ready to start then working out which holes you dont need in the engine bay. Otherwise you may just end up adding holes that you could of used, get me drift. Hope not to seem like im undermining you just been there before. It's a bit more work in some ways but stuff all.
#9
Re: rotary 1200 coupe
84ker88
Posted on: 2009/6/20 9:37
yer mate thats what im going to do, thanks for the advice. my boss wants me to put a rx8 6speed in it, its got me thinking but i dunno...
#10
Re: rotary 1200 coupe
84ker88
Posted on: 2009/6/28 9:14
heres my new motor, 12a 6port. will be getting rebuilt, bridgeported, balanced ect after i make the crossmember up and get the motor mounted properly.
Attach file: P1010073.jpg (39.41 KB) P1010075.jpg (34.68 KB)
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
