hey people. i am after the firewall spacing bracket for my booster the exact same as in this link. it bolts through the firewall with the original 2 master cylinder holes, and is bolted to the booster by 4 bolt/nuts.

http://datsun1200.com/modules/myalbum/photo.php?lid=3606&cid=15

any heap would be great

That part that patrudes of the rear actualy go's through the fire wall I think? I think its part of the booster body not a bracket?

The aluminium piece comes with the 180B Booster and is a spacer. Could be replicated with a S### load of washers. The black piece behind it I made so I had a flat surface to mount to. As it sits on the ridge of the firewall.

Hope this helps

Attach file:

---

  Brake Booster.JPG (24.33 KB)

i have that alluminium bracket but it does not fit flush to the fire wall

there are a few pictures of the booster fitted without that alloy bracket and used the other bracket im looking for

http://datsun1200.com/modules/myalbum/photo.php?lid=7657
http://datsun1200.com/modules/myalbum/photo.php?lid=13370
http://datsun1200.com/modules/myalbum/photo.php?lid=14905
http://datsun1200.com/modules/myalbum/photo.php?lid=13359
http://datsun1200.com/modules/myalbum/photo.php?lid=2945

there is more pictures on here but i can seem to find them
i do know for sure that people bolt this brake booster up using a different 2 bolt bracket instead of the big 4 bolt alloy bracket.
someone must know.. please

aaahhhhhh.. this is driving me crazy. looks like i will have to make my own.

if anyone knows anything please help

This is my 120y booster and aluminium spacer fits flush on the firewall and clears the tower

Attach file:

---

  datto 1200 037 (Medium) (2).jpg (66.20 KB)

the booster and bracket is out of a early rearwheel drive chrysler lancer, Its not a datsun item. thats where you will find one.

if you find one ... havent come across a wrecker in adelaide with a la or lb lancer in the yard

those 2 pics that came from my album, they are of a bracket that i made up myself...wasnt really hard to make, just 2 bits of flat plate and some pipe and a bit of time