+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
L series GX carbys on an A series ?
estyre
Posted on: 2010/5/16 11:10
just wondering if anyone has a manifold to mount these carbys onto an A14 and what power to expect ,better than a 32/36 dgav ? ,and weither or not to just go for webers and sell these
any help would be great !  
#2
Re: L series GX carbys on an A series ?
Posted on: 2010/5/16 11:11
they will run rich, i used l 16 needled sus on a15. they work but not great
#3
Re: L series GX carbys on an A series ?
estyre
Posted on: 2010/5/16 11:15
sus have the round top on them dont they cos these are squared at the top
#4
Re: L series GX carbys on an A series ?
Posted on: 2010/5/16 11:18
sorry, hitachis- there are round top early hitachis as well.
easier writing sus than hitachis but technically they are different slightly
#5
Re: L series GX carbys on an A series ?
estyre
Posted on: 2010/5/16 11:27
ok so will these carby work on an A14 if they are set up properly ?
#6
Re: L series GX carbys on an A series ?
Posted on: 2010/5/16 11:30
yes, i used them, work ok, if new needles will work almost as good as gx round tops. just block the pollution gear stuff
#7
Re: L series GX carbys on an A series ?
estyre
Posted on: 2010/5/16 11:43
can i buy a manifold new or will i need to make one from the old GX one
hehe the angle grinder is comin out ,good bye GX manifold !!
#8
Re: L series GX carbys on an A series ?
Posted on: 2010/5/16 12:04
will owrk on gox, just different likage betewwen the two carbs. not as wide as the l series one
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
