just wondering what the 2 blade terminals are for on the dizzy and what wires i need to run to them? any help? cheers

put a pic up of what terminals you mean and then we can determin what they do

there is a terminal on one side of the dizzy that is earth and is located next to the vac advance actuator ,it shouldnt need hooking up

then there is another one that is mounted to the sude of the dizzy and has a piece of plastic in between it which is an isolator ,this goes to the - on the coil

if you want i can draw up a pic

same as the A12 dizzy

one is ground/earth
one goes to Coil -

if it is an electrionical dizzy it may also have a Coil + wire.

im pretty sure there wasnt one on the blade next to the vac advance when i pulled it out the other car but i cant remember, so the other one goes to which side of the coil?

negative ,from the termianl on the side on the dizzy that faces the firewall

thanks for that