+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
How to remove the Oil Dipstick tube/sleeve? A12
clyons8
Posted on: 2010/11/23 1:28
Um?
Putting my motor together and I've just realised it has no sleeve/tube for the dipstick. I have a couple of blocks lying around with the dipstick tube in it, how do I go about removing it and fitting it to the current engine? Please tell me it's relatively easy. Just thought I'd ask before I went and destroyed something. Chris  
#2
Re: How to remove the Oil Dipstick tube/sleeve? A12
LittleFireyOne
Posted on: 2010/11/23 5:13
wiggle it out and use the elbow grease. could use something like no.3 aviation gasket sealant on it when you pop it into the new block or if it's staying there a bit of JB weld
#3
Re: How to remove the Oil Dipstick tube/sleeve? A12
sidedraught
Posted on: 2010/11/23 8:07
Multi grips.
#4
Re: How to remove the Oil Dipstick tube/sleeve? A12
clyons8
Posted on: 2010/11/23 12:25
Oh sweet, I'll be onto it tomorrow. Was worried I needed a heat torch or something.
Cool, had a look at the block with the tube still fitted, can it be tapped out from the inside if I use the right diameter shaft?
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
