For Sale: Blow Through Turbo intake system to suit A Series.

350 Holley, Genuine 7448 Rebuilt and sealed for turbo with noleathane gaskets. The float has been upgraded and the power valve fitted from Rocket Industries. The holley adapter has been welded to the A14 oval port intake manifold and it bolts straight up.

This Also comes with a plenium (Hat)to suit the holley and a malpassi fuel pressure regulator (Rising rate) This set-up is running on a A14 Turbo and the reason for sale is im going EFI in 2 weeks. The current motor is running low boost and produces good power.

I am based in Sydney(Penrith)Genuine buyers must make appointment to see this motor running (If required) before i remove in 2 weeks time. If not sold it will hit flea bay.

Send me a PM and we will exchange contact details.

Price $$650

If the photos have not come through i can email them to a member that can help or i can send them to you direct.

Attach file:

---

  PC020234.JPG (126.03 KB)


  PC020237.JPG (121.73 KB)


  PC020235.JPG (122.88 KB)

any power figures?

that is a good price . i paid that for my supercharger setup with a 320 holley and pulleys etc. mine makes 80 rwhp but i rekon turbo would make more power

Na i never bothered with Power figures, this motor was road tuned only and running 7-8psi boost(max 10psi). Also the inlet manifold is standard at the moment. A custom one would be the next step in this set-up, i have a set of oval port flanges to suit that i will give the buyer to build a serious future inlet manifold.

Anyone thinking about a carb turbo setup should seriously think about this.

Very tunable and ability to run an intercooler, which means you could safely run it on a standard bottom end.

Good luck with the sale!

u have a pm

free bump - good holley setup very neat, if no one is interested
the VW crowd will be all over it as its a proven setup for VWs.

http://datsun1200.com/modules/myalbum/photo.php?lid=20873
jarryd that 80rwhp was with the aisin 500cc supercharger above?
stock a12 with round ports or other engine?
That y manifold doesnt feed the 1 and 2 inlets properly on the 3 and 4
youd best just use a stock manifold and tube like Supafattos has done
if you where chasing more hp but very neat setup all the same.

i have an oval port head yeah pretty sure its a 500 cc supercharger. custom extractors inlet manifold but stock a12

SOLD, pending payment


Thanks guys its a great set-up. i built this from a mates set-up in newcastle STEVEO might know him. He rallys 1200's and 120Y's with 350Holley turbo blow through with great suscess.

He said to me the holley will let you rev the engine alot better than a webber and great potential if you want to build a power house engine.

As i mentioned i have come across an EFI set-up with computer i couldnt resist, so that will be my next upgrade/project.


If anything changes i will re list here again before ebay.