Im thinking of using these for my ca18de four port cylinder head as I can find 48mm webers and cost of modding my 45s is not worth it compared to these beauties

http://www.ebay.com/itm/OBX-ITB-Indiv ... %26prg%3D1017%26rk%3D1%26

I could just get different velocity stacks or not use the intermediate injector spacers between the TBs and Velo stacks.

What do you guys think?
He is asking 300usd!!!!
4 x 48mm TBs with choice of Horns inc accel mechanism

$678

Damn they look nice! If only I could find a similar set for an A series! Not to mention for that price too! Haha

New extrudabody is $1100 and doesn't come with the manifold

So $700 seems like a good price!

Forgot to mention thats $75 each TB inc horn without the manifold so yes $300usd is the price 4 x 48mm inc horns, much cheaper than 1100!

Then which budget ecu could I run on a ca18de for quads, Im thinking megasquirt atm but maybe a cheap EMS might also do the trick.

$300 for this but longer horns

Attach file:

---

  TB excluding marked in red.JPG (64.56 KB)


  tb wihout required in red.jpg (37.79 KB)

He can do the same price for 50mm

The throttle bodies themselves look exactly like the ones from a 20V 4AGE engine. Might be an option to try and find a set of those, but they would probably be the same price.

EDIT: And the Toyota ones also come in 43 and 46mm.

Attach file:

---

  034.jpg (85.86 KB)

i'm looking into designing a set of these for a a12 also a efi kit too

Actually very different, look at pics carefully & see they have inj bosses on diff. places & also much larger sizes for throttle plates with some incorporating tapered shafts.

For the price cant go wrong at 75usd a pop for 48-50mm