Hi All,

Due to an urgent relocation back to Adelaide from Canberra, I need to sell and clear my project 1200 Ute.

Many of you may remeber this ute as Evil Betty, which caught alot of attention back a while ago.

I came by the ute after buying it out of Bendigo, who had bought it from Evil Betty.

This is a short version of what I have. Due to the timeframe, meaning that it must be sold and gone before the 11th September, I am looking to get rid of it all together.

I am willing to consider reasonable offers.

So working backwards, I will start with the bad bits.

1. I am not happy with the fitent of the larger tunnel. It is sound, but for my mind messy. If you are picky, i would be doing it again.
2. The ute is very stripped. There is no front end in the ute, but the back end is all there.
3. I am not 100% certain what I have. I have doors, guards, tailgate, some glass, no bonnett and a bunch of boxes of bits.
Now the good.
1. Good luck finding rust in this ute. There is essentially none. The roof and wiper panel need to go back to metal again, but engine bay has been POR15'd.
2. Other than the engine bay being POR15'd, the change in tunnel and engine bay being seam welded, it is pretty much the same as Evil Betty sold it.
3. It comes with the following.

A complete CA18DET, which cost the guy i bought it from $2.5K
CA18 has no box.
A hard cover for the tray from MADDAT
MADDAT fitting kit for CA including crossmember and dump pipe.
MADDAT under tray fuel package
Speedo and Clutch cable.
Set of rotors and calipers from a R32 GTR

All of this has set me back well over $5.5K. I am open to reasonable offers but it has to be paid for an gone by the 11th September, no exceptions.

As for Photos, I will try to upload some asap. To be honest, it looks pretty much as it did many years ago. It has been stored indoors the whole time.

My best suggestion is come and have a look. You can call or text me on 0459 265 555. I have had to change my phone number.

You will need a car trailer as there is no front end in it. I used to lift it on and ride it on tyres.

Thanks for looking guys. I won't be putting this on ebay as I would prefer this to go to one of you.

Attach file:

---

  IMG_1539-1.jpg (164.32 KB)


  IMG_1540-1.jpg (122.67 KB)


  IMG_1541-1.jpg (188.72 KB)


  IMG_1542-1.jpg (143.99 KB)


  IMG_1543-1.jpg (191.19 KB)

Are you willing to sell things separate? I would be
Keen
On the hard cover... SMS sent

i am also keen on your hard cover??

Pm sent and i live here in canberra for local pickup

Hi guys, thanks for the offer on the hardtop. I will see what happens over the next week and let you know.

depending on what struts they're i might be keen on those if you want to separate?

If you sell the hard cover separate I would be interested aswell

Hi Guys,

I know I could have sold the hard cover a bunch of times over, but i really need the whole shebang gone by the end of next weekend.

I will take $3,500 for everything I have. We all know thats a bargain considering all the Maddat gear, the hard cover, the state of the shell, the CA18DET with comp and loom, etc etc.

Its worth it and i am taking a bath, but i can't shift it and it needs to go.

0459 265 555

Thanks

Hi Guys,

The ute needs to go before the end of this weekend. Best offer, and someone that can have it gone by the end of the weekend wins.

Here is what I will include.

I will include the shell and all the related parts that I have. From what I can tell, it is all there except for a bonnet and you would want a new beaver panel. I will also includ the leftover POR 15 product that I have which was worth almost $500 by itself.

I will also include the hard cover if the offer is decent. I figure the hard cover has to be worth $500 - $750 in its own right.

Seperately, I also have a standard CA18 which has no box but the loom is there. I figure that is probably worth $500 as well. Turbo seems fine and as I understand it, the motor was low kay.

Need it gone guys, best offer wins.

Thanks

Andrew - 0459 265 555

Now listed on ebay.

200816155547