+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
a15 timing chain allignment
uteboy1200
Posted on: 2013/1/24 4:14
I have just replaced the timing chain on my a15. When i turn the a15 to TDC the crank key is at 12 o'clock. The illustration for Timing Allignment shows the crank key at 4 o'clock. Does the engine have to be at TDC to allign?
 
#2
Re: a15 timing chain allignment
ddgonzal
Posted on: 2013/1/24 7:03
The Datsun 1200 factory service manual says to do it like this:
![Open in new window](javascript:CaricaFoto("http://datsun1200.com/uploads/newbb/174_4ee9b6405e4fc.jpg");)
#3
Re: a15 timing chain allignment
uteboy1200
Posted on: 2013/1/24 7:11
When I set it to this configuration it's not at TDC. The pistons are about halfway up the bore(all 4). If I set it like the image does it matter that it is not TDC?
#4
Re: a15 timing chain allignment
bige
Posted on: 2013/1/24 7:20
10 links dot to dot top side,( facing water outlet )
#5
Re: a15 timing chain allignment
SUN110
Posted on: 2015/1/2 10:29
I am having this exact same issue with My A15, what did you end up sorting out?
#6
Re: a15 timing chain allignment
ddgonzal
Posted on: 2015/1/4 0:31
Yes, not at TDC.
When you check the chain alignment, do not check it at TDC. Check it as shown in the diagram, with the key aligned with the camshaft centerline.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
