I'm after a 120y swaybar with center mounts and the thicker ( I think stanza ) links for a bolt on upgrade for my 1200 ute. Also might be a long shot but I'm chasing a rear swaybar setup. Thanks.

I have a swaybar here how do you know if it is a 120y ?

Apparently the 120y one is 20mm or 3 or 4mm thicker than the ute one

Read this.....
http://datsun1200.com/modules/mediawi ... _First_Suspension_Upgrade

Then read this.....
datsun1200.com/modules/newbb/viewtopic.php?topic_id=55181

matty has a 120y bar for sale

http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=62886&forum=2

ive got a k-mac rear sway bar with diff mounting hardware, but you'd need to make up the chassis links
where are you located?

Is there much involved in the chassis links. Located Wollongong area. What sort of price are you after?

its not a big deal if your handy with a grinder & welder. Just some basic links to the chassis or leaf springs (closest to the mounts)
$150 + post. I can email some pics if your interested

The Stanza links are apparently a bit heavier duty, but on a light 1200 the stock links are strong enough.

See B210 Sway Bar Upgrade

Sway bar diameters:
* B110: 17mm
* B110 HD: 20mm
* B210 LD: 18 mm
* B210: 20mm

different diameters, same width

ANGE: yeah some pics would be great. Please send to steven_riley@hotmail.com
DDGONZAL: that is the exact upgrade I am after. I would buy new larger links and bushes but I would need the center mounts to go with the larger swaybar.

email sent