Hi guys,
Anybody out there with a 60A 5 speed xmember with insulator in good condition for a reasonable price?
Need one asap
Would need to be sent to Europe by airmail.
Thanks

If its urgent your best bet (if it for a 1200) is probably new from Bprojects or its down to fabricating your own. Lots of photos and how to's here.
dp

If you are replacing a 56-series (A12) gearbox with a 60-series gearbox (4-speed or 5-speed), Bprojects has what you need

Bprojects 56-60 Conversion Member kit

The insulator is a stock Nissan piece, used on most larger Datsuns like the 280ZX, 910, R31, etc.

Information on making your own is at 60-series Transmission, rear crossmember

Dont want anything fancy - just asking for a factory 60a crossmember.
It is for a b310 not a 1200.

A B310 gearbox crossmember for the 60A five-speed? Nissan Europe may still have one: 11340-H8610/11340-H8600. Getting very rare in my country

Same as the 4-speed/60L crossmember but for the dip


Fit 20mm spacers and the 4-speed x-member fits the 60A, but will be very obvious to enforcers.