i just changed the wiring loom on my 1200 cause my original one was to tampered with and there was #### every where. i put a standard loom out of another 1200 that hasnt been played with every thing is now working but hi dont know how to conect my dizzy. i know what wire come out the dizzy and went to the coil but not sure what side of the coil - +? and no idea where the other wire goes, any help please

I'm going to assume you have what is referred to as a "matchbox" distributor with the little black box on the side. If so, there are two spade lugs arranged in a "T" and they are labelled on the side of the black box. One is marked "B" and the other is... um, something else, I can never remember. The one marked "B" goes to the "+" side of the coil, and the other goes to the "-" side of the coil.
Of course, you should probably wait for others to reply, just in case I have my head up my ass at the moment!

The distributor always goes the Negative side of the coil (electronic or points). The POS side of coil either goes directly to IGN + or to a ballast resistor & START bypass wire.