+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Tailshaft
Daveman
Posted on: 2003/7/20 14:26
I have a MR30 skyline box behind my CA18 and also a standard 1600 tailshaft. My question is when I get the tailshaft shortened do I need to get upgraded uni-joints or will the standard ones hold up. Or is there possibly a stronger L-series tailshaft I could have?
 
#3
Re: Tailshaft
mely
Posted on: 2003/7/21 2:18
Dunno if the tailshaft will fit the output from the gear box. IF it does then you are laughing, but i know a stanza taily will fit, just needs to be shortened.
mely
#4
Re: Tailshaft
tens_and_twenties
Posted on: 2003/7/21 5:33
Quote:
Yes, the 1600 joints are the same ones used in the early Z's (L24/L28). Should handle the torque just fine. FWIW, the weak link on a 1600 seems to be the joints in the drive axles. Don't know why they fail first, as they are the same joint used in the tailshaft. 
#5
Re: Tailshaft
feral
Posted on: 2003/7/21 11:21
Its the large changes in drive angle that make them fail.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
