User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





shaun
help needed 'blinkers'
#1
No life (a.k.a. DattoMaster)
Joined:
2004/10/13 6:13
From penrith,sydney,aus
Group:
Registered Users
Posts: 1013
Offline
ok so when my wasnt registered i put it into an autoelectrician and got all the blinkers and lights working
now i got my ute registered yesterday and the blinkers have stoped working
we have checked the flasher units and they are fine . is there anything else it could be
or does anyone have a wiring diagram for the blinkers to the flasher unit or any diagram that might help
has anyone else had this problem ?????
any help would be good thanks

Posted on: 2005/2/5 3:55
Transfer the post to other applications Transfer


who_your_datty_1200
Re: help needed 'blinkers'
#2
No life (a.k.a. DattoMaster)
Joined:
2004/2/26 6:32
Group:
Registered Users
Posts: 1440
Offline
Open in new window


Hope this helps

Posted on: 2005/2/5 6:15
_________________
To do something well is so worthwhile that to die trying to do it better cannot be foolhardy. It would be a waste of life to do nothing with ones ability, for I feel that life is measured in achievement, not in years alone.... Bruce McLaren
Transfer the post to other applications Transfer


b310gx
Re: help needed 'blinkers'
#3
No life (a.k.a. DattoMaster)
Joined:
2002/7/19 12:41
From sydney australia
Group:
Registered Users
Posts: 1858
Offline
check the wiring plug into the back of the indicator/light part under the steering column
shroud is fully pushed in.if it's not connected, the indicator circuit wont be complete.it might
have been put back only enough to make initial
contact,then has fallen out on the way home.
hope this is all it is.

Posted on: 2005/2/6 3:32
_________________
Would it be possible to get a late model Nissan Micra, fit the 1.8 litre motor from a Tiida & then turbocharged it? Your answer must include parts numbers for the conversion. You have 12 months. Commence.
Transfer the post to other applications Transfer


pizza_boy
Re: help needed 'blinkers'
#4
Just popping in
Joined:
2004/8/6 1:55
Group:
Registered Users
Posts: 10
Offline
Mate, the blinkers on my old ute weren't workin for a while but they were no loose connectors... if the simple troubleshooting fails, whip out the test light and have a probe around... turned out the problem with mine was carbon deposits on the contacts within the blinker switch (stork) itself, took it off, bit of emery paper... bobs your uncle, flashy flashy flashy!

Posted on: 2005/2/8 10:57
_________________
To all you virgins... THANKS FOR NOTHING!
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]