User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





chris1200t
Turbo - oil line in
#1
Just can't stay away
Joined:
2004/11/30 6:52
From Melbourne, Australia
Group:
Registered Users
Posts: 129
Offline
I was just wondering if you could run the oil line in from the turbo back through the dipp stick hole. and ditch the dipp stick

Posted on: 2005/2/22 10:57
Transfer the post to other applications Transfer


Cable_Tie
Re: Turbo - oil line in
#2
Home away from home
Joined:
2004/6/4 10:38
From Brisbane, Australia
Group:
Registered Users
Posts: 770
Offline
You "Could". If you don't want to take the sump off to weld a return line in properly, do what I did once. Get a piece of thick wall pipe (1" water pipe) and put a 30degree angle on it. Now pound it hard into the sump. Make sure you aim away from the oil pump pickup/strainer. Then weld on the outside. This is better than drilling as you don't get the filings in the sump.

It is not the right way but will work.

Some details of what I did can be found Here.

Do a search on google, or on this site for a start, lefthand side of the screen.

Posted on: 2005/2/22 21:38
Transfer the post to other applications Transfer


1000Coupe
Re: Turbo - oil line in
#3
No life (a.k.a. DattoMaster)
Joined:
2004/3/19 8:16
From Perth WA
Group:
Registered Users
Posts: 1154
Offline
how did u get your nikname again?

Posted on: 2005/2/23 10:08
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]