Hey guys just wondering if anyone had a Stanza manual tailshaft lying around that they may want to part with?

It is to bolt up my 63a 5spd gearbox to my A series and H165 diff centre.
Even better if your tailshaft has been shortened approx 2 inches to accomodate this mod...

Also if you have a lightened flywheel suit an A14/ A15 Id be interested in a purchase of that too.....

Quote:
me so jealous

ill be buying one of these stanza tailshafts maybee this weekend in Orange ; if theres 2 there i can get both of em and hand 1 onto u. how much are they worth ?

Hey Craig,
stanza tailshaft? Is this due to the 63a? Are they not the same spline as other boxes ie use a ute tailshaft? I have a 120y auto shaft and C20 to supply flanges and a new lightened flywheel (was going on A15 but didn't build it) If it helps, let me know.
Cheers

Hi Jeff, the 63a has a different output shaft than the present 60a box so I will either :-

A) modify a Stanza tailshaft which used the Lseries manual box and H165 diff. This would need to be shortened 2 inches to fit in the coupe.

B) Modify my current tailshaft to accept an L Series yoke , but that means I'd have to get another ute tailshaft so I can run my current gearboxes...