I was just wondering what size injectors would you run on a fully worked A14 that has quad throttle boddies. It will be running on methanol so i figure i will have to double the amout of fuel compared to pertol..right?

stay classy
Andrew..

bump

i'd probably look at something like a 2.6 magna injector or a VL depends on if you need a tail
( hose) or an O ring seal
the type of feul rail you want to make will determine what inj. to use

its for methanol..

oh maybe you will need a set of 850cc GTR skyline squirters then
or a set big enough to flow feul for a 200hp petrol engine.

well my intention is for the motor to crank about 160 or so because it will be completely worked...

I wish my R & D and maintance budget was as healthy as yours is , ( turning green )

Well it aint too healthy at the moment... but is will be blooming soonish..lol

for a petrol engine i would have said VL 320cc injectors would flow MORE than enough fuel.

however, methanol runs at...what - 4:1 A/F ratio vs 12:1 for a petrol? so if your fuel consumption is upped 3 times, then up your injector size 3 times.

heading into expensive territory there! talking about 1000cc indys here - like $300 a piece!

Really i thought id need around 650cc or so nothing that high. Is there anything i can do to give me more fuel wothout going that many cc?