hey there i was just wondering wat size turbo you guys are using with your turboed A serise set ups
i have a 2 and a quater at the moment would i be better of with a 3" or would that be overkill for a 1500

Quote:

dont u mean what size exhaust....

the thing about turbo exhaust is that turbo's hate back pressure, as opposed that atmo engines that need a compromise between back pressure and flow.
theoretically if running a turbo, you shouldn't use an exhaust at all, but since its illegal to do so, a compromise is needed.
i'd say anything from 2.5" to 3" would be good, with a cat (if needed) a ressie and then a cannon muffler. good flow, but not as loud as some....

oops yeh thats wat i ment

No Muff on my 3in Landbruser Zors. Quit as a mouse at 100ks. Wheel noise is a differnt thing with MT117 X 33 X 8 X 15in.

I'll try a 3" straight through exhaust on my sunny, as the turbo usually quietens down the exaust note. If its too loud then i'll put on a resinator or something. Cheers. Adam.

I run an A14 with 3in from turbo until it goes under the floor then 2.5in to the rear muffler, straight through muffler with 4in tip, very road friendly, exhaust one atmo is louder than an turboed system.

3 inch turbo back with a cannon muffler on mine.

not too loud at all.