http://www.muzzys.com/catalog/ignition/index.html




DYNA 2000 DIGITAL PERFORMANCE IGNITION
(4 Cylinder)
The Dyna 2000 Digital Performance Ignition for four cylinder engines represents a breakthrough in motorcycle ignition flexibility . The Dyna 2000 system consists of a state of the art microprocessor controlled ignition module along with an adjustable Dyna dual sensor crank trigger . For the first time you can actually set the ignition timing to what you want to maximize engine performance. A number of different advance curve modes and a broad range rev limiter let you tailor the ignition to your needs. Features of the Dyna 2000 include:

FULLY STATIC TIMABLE- You can set the timing accurately to the desired value without having the engine running.
INDEPENDENT 1/4 2/3 CYLINDER TIMING- The Dyna dual sensor crank trigger uses one sensor for cylinders 1 & 4 and the other cylinder for 2 & 3 allowing you to accurately set the timing for each cylinder pair.
BUILT-IN STATIC TIMING LIGHT- An LED light built into the Dyna 2000 ignition module allows you to monitor the crank trigger signal status and easily set the ignition timing.
FIVE DIFFERENT ADVANCE CURVES- You can advance slowly to dial out pinging on high compression motors or bring the advance in quickly on quick revving motors or select a curve in between to maximize the performance of your combination.
FOUR DIFFERENT RETARD MODES- The Dyna 2000 is an ideal solution for turbo or nitrous combinations.
TEST MODE- System check out and troubleshooting is a breeze with this feature.
SAFETY INTERLOCK INPUT - You can keep your side stand safety switch functional or hook up a theft prevention switch, or activate a shift lever kill for road racing.
BROAD RANGE REV LIMITER- The Dyna 2000 rev limiter is adjustable from 8500 to 16,000 rpm to let you run in any range you want.
DIGITAL TACH OUTPUT - Your tachometer will run smooth and accurate, even at the rev limit.
HIGH ENERGY - An innovative dwell control scheme maximizes spark energy all the way to 16,000 rpm! The Dyna 2000 can be used with 2.2 ohm or 3 ohm coils.
EASY MOUNTING- The Dyna 2000 ignition module has built in frame saddles to make mounting anywhere a breeze.
COMPLETE WIRING HARNESS- The Dyna 2000 kit includes a complete wiring harness to simplify installation.
LOW COST!- The Dyna 2000 system in most cases costs less than a stock ignition box.

under 400us$ little mounting mods required to suit other engines will be nice for straight LPG setups

Hmm very very nice...

aw man, as soon as I saw 400us$, but yes that is definatley worth finding out who's been using it in Aus

and to think the kettling system does the same thing.

I wonder if this price will drop locally or if there is something similar like the old ignition only computers sold by motec or some other that I cant remember.
It will help with alot of fwd type engine conversions into rwd format.