Hey how much would a rebuild on the A15 cost?? any know how much another A15 would go for??
thanks ty

Are you going to do it your self? If you need new pistions it can get to around $500 with out labour. I you dont need pistions bout $100 for all bottom end bearings and $50 for gaskets and rings might be around $50 (not sure i got mine off ebay for $12)

Searh to cos i think i asked this question a while ago

It all depends what needs doing if you need need lots of head work done the price can sky rocket.

Buying another engine would be cheaper, I would only rebuild it if i was chasing more Hp.

I have had two engined rebuilt, first was my GX it was with one of my old customers so mates rates were involved.
I had first o/s pistons and rings so engine was bored new bearings ,timing chain and I think tensioner,full gasket kit,cam was ground,head was machined and valves were done at the same time,oild pump was also stripped and checked cost to me was 900 bucks.
The same guy did a std A12, bore was hones and new rings fitted,new bearings and timing chain,head was done at the same time also full gasket and seal was fitted cost on that was 500.
shop around and have a list on what you want done.
I was in the trade at that time so I had many contacts believe it helped with my resto.
A12 are not a hard engine to do but with my GX engine getting 1st oversize pistons took a bit of searching
ade