A couple of people have asked me to make them Brackets to suit an SC14 onto A14/15. At the moment I am not really in a position to be able to do that, but if there is enough interest I will look into it.

Blower thread


The kit would include brackets, manifolds and idler pulley. Crankshaft pulley would probably have to be done by the purchaser, because I am unlikley to be able to get enough A series pulleys.

The price would probably end up in the $300-400 range (that would be with my time coming in at at $3.50 per hour)

The purchaser would still have to organise to cut and weld the plumbing, but there is possibly an easier alternative- re-routing the heater return line to the spare (emissions related) plug on the firewall side of the inlet maifold.

The total cost of this conversion would probably come in at $1000-1500 depending on how much you got the blower for, if you can do the plumbing welding yourself and what fuel pump & carby combo you use.

If there is not a significant level of interest I will just post up some plans for people who are keen enough to have a crack themselves.

Oh yeah- and all bets are off untill I actually get the thing running -hopefully this weekend

Well that fell off the front page pretty damn quick.

**BUMP**

Sounds good man!

Pity my projects at the moment are atmo...

I might take this chance to hijack yer thread (think of it as a bump!) and see if anyones after a SC14 in great nick to go with an above kit?

i have a mate who could be interested as he is doing this conversion in his ute.. this sounds like a fair price. where are you??

I'm in Perth. the kit would weigh about 10kg I spose for shipment purposes.