Does anyone know where to get performance parts for the a series engines?
ie. cams, pistons, rods, valvespring, roller rockers
thanks

cams can be made to suit at a place that makes cams...

pistons will most likely have to be made if you want forgies.

i doubt you will be able to ge rods made. just shot peen yours etc...

crank same, just knife edge it etc...

there was a website of a company here in aus that made parts for the Aseries but cant remember the name now.

keep your eye on the classifieds here, eBay and trading post and you will find some good stuff...

you'll have to pop down to one of our meetings on the 2nd tue of each month in Morley. I know your in Gero but it may be worth it to see what people have!

Quote:
Yes

Rods. Why?
People successfully use the basic stock rods in flat out race engines, so relacements are not usually required.

Cams.
Tighe Cams link
Wade Cams link
There are others of course, but these are the ones I have links to.

Pistons.
Stock ones have been used in everything from stockers to racers to blown applications. What do you have in mind for your engine?

Valve springs.
Don't know, but others will, hopefully.

Roller Rockers.
You're geting serious now. These are made in Australia by Perfectune/ Yalla Terra & available through Rocket Industries. Budget on anywhere up to $850 by the time you get them home.
Custom pushrods are also required.

Other.
JTS might also be a helpfull place to shop, but brace yourself for the mongrel pop ups that invade your computer & shut them down as quick as they show up.

I wish he would get a real website.