Well the story so far is that while doing the ca conversion for my ute i decided to beef up the brakes. I have gone for landcruiser 60 series calipers with the S13 SR20det discs all mounted on a 200b strut. This is all done and looks and works great, but the problem is now what steering arm or Lca to use. The 200b steering arm has a different taper to the 1200 ball joint and the 200b lca is far to long to use.
So i was wondering what steering arms suit the 200b strut base or is there a bigger ball joint with the same bolt up pattern as the 1200 ones or is there a lca that is the same length, but has the ball joint that suits the bigger taper.
Any help would be great

now that you have your answer(use stanza stuff)....i also cut and shut some 200b control arms onto 1200 ends (the 1200 crossmember end with the bush is it) to use in the ute, then used corona adjustable radious rods

dont know if id do it for a street car over stanza control arms though....unless i was after longer control arms