Guys, I have attached a photo of my new strut brace ( many thanks Boofhead and co. ) but its sitting in the photo album and being semi computor illiterate I can't seem to get it to the main forum.
I'd certainly be obliged if one of you guys could help me out here and offer some guidance for any future pics.
Cheers
Dave

When you looking the a picture in the photo album, right click on the picture and go down to 'properties'. A little box will pop up with 2 URL's in it. You need to highlight and copy the bottom address (the one that ends in .jpg) . This is the address of the image you need when you try to insert the image in a response to a main forum thread.

looks the goods !!! almost like a bought one

have you got a pic of the bar end/strut plate that shows how you finished it off ??

also for putting a pic in your thread ...
right mouse button click on the photo on the screen, on the pop up hightlight and copy the properties bit.
go to the post thread/reply screen and the little button that has IMG just above where you type click on that, a pop up comes up and then paste the photo properties that you copied from the picture into it .... ok the next bit till you get the hang of ... preview your handy work and if you get the post looking like what you want hit submit and bob's your aunty

edit : DAMN YOU DAVEMAN !!!!!!!!!! DAMN YOU !!!!!!!!!!!!!!!!!!!!!!

winner!

Like the airbox - where's it from?

looks nice, just one question

what is the purpose of you fitting a strut brace?
I was under the impression that they only really benefited cars with huge HP and flimsy chassis', of which I dont generally put any datsuns despite what we all dream of

Thanks guys. I'll endeavour to take a pic of the endplates Boof.
The airbox I made myself.
The purpose of the strut brace is to help stop any flex in the strut towers during the high stress loadings of cornering on a race track.

and extra bracing in a 1200 is never a bad thing

That brace looks awesome.
Did you make it yourself ?
Would it fit a ca powered 1200 ?

Its a R32 Skyline alloy cross bar with Boofhead profile end plates laser cut.
As far as fitting a CA powered 1200 I'm sorry I really don't know - perhaps Boofhead may be able to offer an opinion?