has been fully engineered in NSW (Engineer reports supplied) CAN BE REGISTERED!
weld in CDW steel cage to current CAMS specs
IPRA legal flares and front/rear spoilers
body in VGC - no rust. you won't find a cleaner Datsun 1200 shell.
CA18DET
190rwkws@15psi-230rwkws@22psituned on 98RON pump gas
Venolia pistons +.020" 8:1CR
Total Seal rings
Argo rods
Nitrided crank
Tomei procams 260deg 8.8mm
Tomei valve springs
Tomei vernier cam gears
Ported head
ARP stud kit
MLS steel headgasket
HKS GTRS turbo
braided oil and water lines
tuned length thick wall steam pipe turbo manifold
sonic studs, metal-lock interference nuts
genuine Nissan MLS flange gasket
SARD 700cc injectors
SARD FPR
Carter black 110gph low pressure lift pump
1lt surge tank
Bocshe motorsport 044 700hp efi pump 3/8 feed with 5/8 return.
PWR Intercooler, silicon turbo piping
PWR alloy radiator
PWR oil cooler
12" Spal fan
Autronic SMC engine management
Autronic 500R CDI 4 channel ignition
chromemoly flywheel
Custom daiken extreme 4 button sprung centre clutch
S13 Silvia 5spd
4.375 H190 diff 29spline 30mm axles
15*7 & 15*8" Superlites
205 & 225/50 Toyo Proxes RA1
Nissan Z32 300ZX 4spots and vented discs front
Mitsubishi Scorpion slotted rear discs & calipers
Koni custom vavled shocks front and rear
height adjustable platforms front
JTS custom reversed eye rear leaf springs
adjustable strut tops
current adjustment:
4deg camber
5deg castor
2mm toe out
46.35 at Mt Cotton
51.54 Grafton Hillclimb
58.23 QR Sprint track
PRICE: $15,000 or VERY near offer.
LOCATION: Brisbane
CONTACT: Harry 0400 656 191
REASON FOR SELLING: don't get time to use it - so have bought a turbo Supra road car instead and the Datto has to go.
tandem axle trailer with load sharing springs, hydraulic over-ride brakes and near new light truck tyres available for additional $1500 with the car if required (will not sell seperately - pls do not ask).
Alternatively, I can deliver the vehicle as far as Sydney for $500.


