hi people ive been told that there is a differant eng mount that are almost the same as a12 ect, i far as i no they are out of a cortina but not sure wat type any help would b good
thanks nick

Rb20 ones are bloody close. They are the same thickness, but have a much larger area. Although they dont fit the Xmember without minor modification to the flange upon which they seat. Also the studs are directly opposite, opposed to the slight offset of the A series mounts. So there's a need to slot the holes slightly.

Have a look here: http://datsun1200.com/modules/myalbum/photo.php?lid=9132

those are for a jag arnt they.
Im using the same ones.

Best upgrade the cortina mounts. Stock mounts are puny. Used to go through them as reguarly as underpants. 2years on the cortina mounts show no signs of failing what so ever.

which model cortina is the question???

they arnt just sitting in wreckers for us to investigate anymore

Use the part number in the picture above. They are the correct ones.

bump

those mounts are v8 rover ones about $140 a pair from rapeco i am using them in my a series turbo build....

I use these same "hockey puck" mounts as the Americans call them, in my CA