Just wondering what radiator everyone is using in there 1200 with a ca18det.

cheers

I use an S13 radiator with mine.

Hey i use an R32 radiator. Need to cut a small square of molding under the bonnet- just behind the bonnet latch to allow the rad cap to fit. Have to build up the mounts slightly on the bottom so the radiator doesn't sit on the plastic tanks and also cut off the top mounts for clearance.
I initially thought it wouldn't fit but Jake77 gave me the above advice, worked a treat. thicker than the S13 one too with inlet/ outlet in the same position. jus

use the s13 one, no mods are needed except enlarging the radiator support panel hole. you can buy thicker ones of ebay for next to nothing

Rito cheers i'll have a look.

The other one i know of is Holden VN 5L. nice big radiator with next to no mods.

With the S13 rad you may probably have to raise it up a bit of its standard rubber mounts too (like the R32).

I put an extra inch of rubber spacing on my rad to stop the lower rad hose from rubbing on the front crossmember.

...yeah and hacked up the rad support for more airflow.