hi i have bought a sunny disc brake front end for my 1200 ute and i was just wondering if anyone knows how to make the brake booster fit in, i think i have to make a hole further over from where the original was to fit it in.
got any ideas anyone

i have fitted the same to my ute but i did a few mods to the booster arm i made it fit against the firewall

easiest way is to space the booster off the firewall by 25mm or so...

i really dont think it is required until you go to 4 wheel disc

i have 4 spot calipers and bigger drums on rear and am still happy with brake pedal feel and effort required even with stock master cylinder

ok john did you have any pics of your booster

i only got disc brake front end, so you seem to think it is alright without the booster

im gonna to b running stanza dics on mine and alot of people have said it will be fine to not use a booster, all a booster really does is assist your foot on pusshing the pedal be a man an just push a little harder much eaiser i thing.
i dont mean anything bad by this this is just how i c it

nick

ive got a sunny booster in my car, got pics of the adaptor in my photo album

but only went a booster after i had a 7/8th master cylinder and 4 wheel discs

A 70's LA/LB lancer booster has 2 holes at the correct spacing for a 1200, you can use the lancer master or 180b/120y master bolts up.

They aren't really necessary, just make pedal easier to push, good for girls cars, Im not a fan.

it goes well with my girly brakes