Anyone know a part number or anything that fits 1200 sedan rear wheel cylinders. Ours seem to have blown on both sides and Repco say they have no listing. Do 120y or something fit ?

Repco lost the plot about 5 years ago.Whip one off and hit the after market guys,they will have the size and maybee the P/N stamped on the side.

Thanks for that.

Depends on disc or drum front

Let me know and I'll give you the numbers

just had look only have listing for b120 ute or 120y atm depends on drum size
the 120y one are
17.46 drum p/n jb2310 for l & r about 13 each power master
19.05 drum p/n jb2396 for l & r about 12 each power master
the ute ones are for a drum size
20.64mm p/n jb2311 for l & r about 16 each powermaster
this is form autobarn catolouges
cheers buzz

have done a little more research for you pbr have a listing

from 01/1970-12/1973 20.64 drum jb2311
from01/1970-04/1974 17.46 drum jb2310

hope this helps cheers buzz

Thanks heaps for all the info mate. Appreciate you taking the time. Will take the part numbers to Supa Cheap and see what they can do them for if they can do them. Your a Champion

all good andy little quite tonight helped fill in time
pbr have an online catologue you can check for parts the 1200 come under b series
cheers

Hey Andy, If you don't have any luck with super cheap. See if you have a ABC (Australian Brake and Clutch) branch handy. I have a pair of wheel cylinders that will need a touch up, all yours if you need them. Couldn't Repco supply the cups and rubbers? I can't imagine that they would be anything special Eg: Standard dia cups. They used to sell that sort of gear loose. Did the master cylinder arrive? Should be there by now. If you need any thing call my mobile, I am out of town. Hope you get this sorted

ripco can get them, just if not on computer thay say cant get,to lazy to look in book.
only on computer if sold by shop before