im casing the bar in between the tie rods for left and right sides...

edit: for a 1200 ute

Hi Frank,
Its called a draglink. I bought a genuine one but it cost over $300. ive seen them on ebay for just over $100.

Theres 1200 ute draglinks for like $150 on Oztion Good seller to have bought a few datto bits off them.Click Me

Drag link is the crossrod (center link).

In between the tie rods is actually the tie rod adjuster bar, just a dual-threaded rod actually. #30 in the picture.

Which one do you need?

dd is right. im after the part number 30 which is the tie rod adjusting bar.

as for the draglink you can get them from rapco for $100 i have now bought them twice once a few months ago and once a few years ago

wow, for once I didn't get it wrong. Never hurts to ask I reckon.

SPICER/RAYBESTOS 4251021 $6.83
ACDELCO 45A6021 $10.79

Nissan may have these



RockAuto.com


same as (at least for North America):
1971 - 1973 1200
1973 - 1976 610
1977 - 1979 200SX
1974 - 1977 710
1968 - 1973 510
1974 - 1978 B210

If Nissan Dont have them Repco may. If you want a good second hand set we can help. Though looking at your pics everything has to be New or New looking

spray paint and my best mate (angle grinder) makes everything look good

Well if ya dont get em New there here ready to send. Mine are 1200 sedan but its the tie rod ends that differ not the centre rod i compared a set to Stanza and there the same.