Datsport Front end sr20 kit, brand new semi installed, car never moved a foot. *new*
[url]http://www.datsport.com/SR20_fitting_kit.html[/url]
$1450

Transmission shifter cover kit conv *new*
$99
[url]http://www.datsport.com/Transmission_cover.html[/url]

Throttle pedal and cable kit SR FJ CA conv *new*
175
[url]http://www.datsport.com/Throttle_pedal_kit.html[/url]

Center mount hand brake conversion suits all 510. *new*
*Sold*

adjustable rear cross member(Version 4.1 ) 510 1600
http://www.datsport.com/Adjustable_rear_cross_member.html
$900 ono
With hand brake cables(brand new), R31 calipers(2 pairs and seals for rebuilding)
New wheel bearings, Slotted RDA rotors, Caliper brackets A arms
All new bushes too. Never used.

PLMS loom with Mounting plate $500
http://www.plmsdevelopments.com/images/completed_loom.jpg

Black roof lining paid $170 brand new never used, still wrapped up
*SOLD*

Undercar surge tank, Brand new to suit 1600, With Bosch 044 with speedflow fittings $600
all brand new, fittings and pump were over $420...




Sr20-1600 intercooler kit, full kit, cost over $2200 new,
1 x BMW V8 Alloy radiator - $540
1 x Standard intercooler from Justjap with 2.5" inlets - $300
2 x 10" thermo fans bolted to radiator - $50 each
1 x volvo overflow bottle with brackets and cap - $130
1 x custom laser cut strut mount - $110
1 x custom stainless steel radiator and intercooler cover still in plastic cover - $100
Intercooler piping for both inlet and outlet with relevant connections - $200
1 x BOV mounted to intercooler piping ready to go - $80
Silicone elbows/reducers etc for piping - $160
Radiator hoses for inlet and outlet and overflow bottle - $50
custom radiator head outlet and three piece connector for overflow bottle - $100
Heavy duty T-bol clapms for I/C and hose clamps for radiator hoses - $50
Custom stainless steel brackets for I/C top mount - $20
Plus all necessary bolts/grommets/mounts etc required to mount assembly.

This is a COMPLETE package and is brand new never used with no fluids used.



$1450


Oil cooler kit for sr20, CNC relo kit, Braided lines, B&M thermostat,13row core, thermostat-core has speedflow fittings $550 will have pics up soon. *Brand new*


VDO speedo and tacho, 4in? (need to confirm) brand new in box, with moutning plates etc around $900 new when I got them.
$750 for the pair ono. will have pics up shortly.



Gizzmo EBC $180 used. will have pics up soon.

R31 Front struts, Datsport coilover set up, Cusco strut tops (used) Z32tt calipers, custom rotors to suit 280x30mm, Caliper brackets, Braided adr approved lines, EBC yellow pads everything s brand new besides the strut (reco) and strut tops and calipers. $2450ono, comes with a spare set of slotted rotors as well $280 worth a pair, MASSIVE stopping power.. height adjustable coil over package..



Exedy hyper single plate clutch, with lighten flywheel, used for 1300kms on running in engine, then went for a twin plate as we added nos and a huge turbo, flywheel was surfaced, clutch plate was replaced, and both fully balanced, clutch cost me $2200 new, plus balancing and surfacing, selling for $900, will handle 250-290rwks all day every day and isn't super harsh on the drivetrain,
flywheel is very light, will weigh it and post.



Trust style aftermarket sump for sr20, fits datsport kit, adds over 700ml of extra oil, ensures motor always has oil on hard cornering due to its baffle design. and added cooling fins also help.
$215del



Sr20 short shifter, Midnightmods


95del free gearknob too. brand new



Gauges, Defi style gauges, all brand new in box,
Oil temp, water temp, oil pressure, volts, boost, intake temp.
everything needed to install have used them before and they are spot on. Great looking gauges too.
$80 each or $420 shipped for the lot. have spare mounting cups too



Viper alarm, Brand new, remote start, almost every add on you can get, cost me $12** something from autobarn about 2 years ago, back up batt, 3 sirens, tilt, glass break, plenty of add ones. all brand new
$650 shipped.



Turbo Bennie to suit T2871 T28 etc turbo,
used but not for long
Sold!



Davis craig 10in thermos fans x2
$100 for the 2




There is still more which I will add up as I clear out the garage..

If you offer stupid prices don't be offended when I tell you were to go, there has been no money spared on this car and only gets the best..

Im still seeing i will keep the shell so don't ask about that please.

Clutch and flywheel sold, turbo blanket sold.

location MELB SE SUBS

can arrange interstate freight cheap if you need.

mate have you still got the rear crossmember and brake stuff???

hey mate just a quick question on the defi gauges what size are they cheers

-"Oil cooler kit for sr20, CNC relo kit, Braided lines, B&M thermostat"

-"Exedy hyper single plate clutch, with lighten flywheel"


Hey mate i may be interested in these things if you know they will fit a CA18det???
Also what did you do with the T2871 turbo you where running?
Thanks Rhys.
PM me if you like

G'day mate, Have you still got the intercooler kit, struts and brakes available?