hey guys i just bort a trx that has 4 wheel disk brakes with the intention of upgrading from my drum brakes on my 1200 ute, any tips would be helpful if anyone has done this before i hope to use the trx booster and master cylinder as well

rear brake setup is pretty much a straight bolt on

need to press the wheel brearings off the trx axles and take everything brake wise off them, then put it all onto the ute axles
you will also need to swap to the longer axle flange studs that the trx diff has
will need to weld on some flexy brake line holders

think thats about all

for the front end you need to do a strut swap to get the brakes on easily, and if your going to that effort you might as well use r31 brakes as they are larger adn bolt straight onto the bluebird strut

booster will most likely be to big to fit space wise so your better off going with a 120y/180b and sunny sized booster

oh yeah that sounds good about the back brakes, wats involved in the strut swap, will it affect my camber, height, caster? and does it bolt strait in?