User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users



(1) 2 3 4 5 »


Weight of a 12a rotary?
Home away from home
Joined:
2008/8/29 3:06
From Sydney NSW
Group:
Registered Users
Posts: 514
Offline
Does anyone know the weight of a 12a rotary engine? I have heard many times about its small size and light weight, but i cant find what it actually weighs! Any ideas? Thanks

Posted on: 2009/11/2 4:43
Transfer the post to other applications Transfer


Re: Weight of a 12a rotary?
Home away from home
Joined:
2008/10/11 0:24
From Griffith
Group:
Registered Users
Posts: 170
Offline
Hey mate im not sure of the weight but have a look on www.Ausrotary.com

Posted on: 2009/11/2 4:56
Transfer the post to other applications Transfer


Re: Weight of a 12a rotary?
No life (a.k.a. DattoMaster)
Joined:
2003/3/2 6:16
From Melbourne AUS
Group:
Registered Users
Posts: 3300
Offline
i dont know how much they weigh (id be intersted to know aswell), but im guessing about the same as an a12.
gearbox is a different story though, mazda box probably weighs at least double that of the datto 4spd.

my ute was 40kg heavier all up post conversion.

Posted on: 2009/11/2 7:19
_________________
1973 B110 A12
Transfer the post to other applications Transfer


Re: Weight of a 12a rotary?
Quite a regular
Joined:
2008/10/23 9:00
Group:
Registered Users
Posts: 58
Offline
between 100kg and 120kg i believe

Posted on: 2009/11/2 8:01
Transfer the post to other applications Transfer


Re: Weight of a 12a rotary?
No life (a.k.a. DattoMaster)
Joined:
2002/8/11 8:22
From Perth
Group:
Registered Users
Posts: 2691
Offline
Found on a rota site

mazda 12a rotary with transmission, flywheel, clutch, starter, intake, carb, alternator, coil packs, all required wiring, homemade exhaust header, as pulled from a running car (eg, I could have started the motor on the scales if I hooked up 12V) was 375lbs.

Posted on: 2009/11/2 9:49
Transfer the post to other applications Transfer


Re: Weight of a 12a rotary?
Home away from home
Joined:
2008/8/29 3:06
From Sydney NSW
Group:
Registered Users
Posts: 514
Offline
cool thanks guys thats exactly the kind of info i was after, and 40kg heavier is not much for the power bump if you had one of these. At least if the extra weight was in the tranny its positioned where it can give some good balance

Posted on: 2009/11/2 11:42
Transfer the post to other applications Transfer


Re: Weight of a 12a rotary?
No life (a.k.a. DattoMaster)
Joined:
2002/10/28 6:49
From under the Firmament LOL no twiglight effect BS
Group:
Registered Users
Posts: 10934
Offline
ca18det eats a 12a for a snack in the conversion, weight and performance dept.

Posted on: 2009/11/3 12:17
_________________
"Australia" is formed by all its geographically listed territories "including" Norfolk, Christmas & Cocos Islands. The word include excludes all else before it therefore you have no legal rights.
Transfer the post to other applications Transfer


Re: Weight of a 12a rotary?
No life (a.k.a. DattoMaster)
Joined:
2007/1/22 23:06
From East New Britain, Papua New Guinea
Group:
Registered Users
Posts: 6981
Offline
Are you rotor-ing a 1000 eFunk?

Posted on: 2009/11/3 13:05
Transfer the post to other applications Transfer


Re: Weight of a 12a rotary?
Home away from home
Joined:
2008/12/16 3:25
From brisbane. waking up the neighbours with the brap
Group:
Registered Users
Posts: 250
Offline
well a c18det should eat a standard 12a rotary.. if it was 12a pp or 12a turbo the rotary would smash the ca18det. as for how it handles. depends how you do the convertion.

Posted on: 2009/11/3 22:56
_________________
13b turbo datsun 1200 ute. (WARZ ON)

www.maddat.com.au
Transfer the post to other applications Transfer


Re: Weight of a 12a rotary?
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31599
Offline
Yes, a modded CA18DET beats a stone-stock 12A rotary.


But the 12A is lighter
CA18DET - engine alone: 282 pounds
CA18DET 5-speed: 85 pounds:

CA18DET w/o all acc. but with gearbox: 367 pounds
12A, all acc. & gearbox: 375 pounds, all the weight down low
add an alternator to the CA and that's 377 pounds...some of the weight up high, and more forward too

Look like the 12A beats CA18DET for weight!

Posted on: 2009/11/3 23:52
Transfer the post to other applications Transfer



(1) 2 3 4 5 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]