User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





Strop
WTB Crank-pulley bolt and washer
#1
Just can't stay away
Joined:
2010/4/29 0:51
From Central QLD Coast
Group:
Registered Users
Posts: 83
Offline
Heya guys,

Sorry for the silly question, but where would I buy a new crank pulley bolt and washer from? Would that be through nissan only?

Just can't seem to find mine anywhere. Just when ya need it for the rebuild too!!

Cheers guys
Clay

Posted on: 2010/8/26 12:35
Transfer the post to other applications Transfer


clyons8
Re: WTB Crank-pulley bolt and washer
#2
No life (a.k.a. DattoMaster)
Joined:
2007/1/22 23:06
From East New Britain, Papua New Guinea
Group:
Registered Users
Posts: 6981
Offline
New from Nissan. I have some spares I'm pretty sure.

If you want I can get a pt number to you but there should be a part number in the wikiwikiwiki.

Posted on: 2010/8/26 13:10
Transfer the post to other applications Transfer


Strop
Re: WTB Crank-pulley bolt and washer
#3
Just can't stay away
Joined:
2010/4/29 0:51
From Central QLD Coast
Group:
Registered Users
Posts: 83
Offline
Thanks for that Chris. I did see the part numbers in the wiki, was just hoping to avoid using our local Nissan joint.

Guess i'll get it ordered

Thanks again mate.

Posted on: 2010/8/26 23:22
Transfer the post to other applications Transfer


Strop
Re: WTB Crank-pulley bolt and washer
#4
Just can't stay away
Joined:
2010/4/29 0:51
From Central QLD Coast
Group:
Registered Users
Posts: 83
Offline
Local Nissan place said they can't supply them any more, no reference in their system.
Does anyone have 1 in good condition that I could buy or know the dimensions of one so I can get one made/sourced from bolt shop?

Thanks guys.

Clay

Posted on: 2010/8/27 1:00
Transfer the post to other applications Transfer


ddgonzal
Re: WTB Crank-pulley bolt and washer
#5
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31599
Offline
Quote:
Crankshaft
12308-H1000 WASHER-PULLEY BOLT 1 A12 - $1.29
34.5mm OD, 0.64 in (16.2mm) ID, 8mm thick
12309-78200 BOLT-CRANK PULLEY 1 A12 - $5.73
M16 x 1.50 (fine) pitch
15mm diameter
27mm long
The head is 27mm hex and about 15 mm thick.
Torque: 15-16 kg/m (108-116 ft. lb.)


I used an extra-long bolt for more crank trigger, just used a 10.8 grade (extra strength) bolt. Dunno if that is overkill or not.

Posted on: 2010/8/27 2:54
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]