Browsing this Thread:
1 Anonymous Users
|
|
will these wheels fit 1200 ute? |
|
|
Just popping in
Joined:
2008/12/27 1:45
Group:
Registered Users
|
the wheels are 13inch and the centre bore is 75mm with the 4 bolts.. will these fit my 1200 ute?
Posted on: 2011/1/14 4:22
|
|
|
|
|
Re: will these wheels fit 1200 ute? |
|
Quite a regular  
Joined:
2010/10/8 3:18
Group:
Registered Users
|
Datsun 1200 uses a common wheel bolt-pattern: 4 bolt holes on 4-1/2 inch circle (aka 4-on-4.5). Nissan engineers measured this in inches. In metric, this is equivalent to a 4 x 114.3 PCD (Pitch Circle Diameter
hope that answers your question
Posted on: 2011/1/14 4:39
|
|
_________________
85 1200 ute
|
|
|
Re: will these wheels fit 1200 ute? |
|
Quite a regular Joined:
2010/4/12 13:22
From SA
Group:
Registered Users
|
i hav 13" x 7 watanabe's on the front of my ute.. and my centre bore is 65mm and i had trouble getting the wheels to sit right. so i put some 6mm slip on spacers and they are all good :)
so im guessing you should be ok with a 75mm centre bore.. i suggest you try b4 you buy.. and if you use spacers put some lock tight on your studs just 2 be safe. or get longer studs.
hope this was the answer u where looking for.. good luck. :)
Posted on: 2011/1/14 5:13
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
