No life (a.k.a. DattoMaster)  
Joined:
2008/6/15 9:11
From Melbourne
Group:
Registered Users
|
Hi I'm looking at going ca now so time to move on my almost finished turbo setup, u can see it running on YouTube there is a link in my project build, it's a t25 setup that will mount up to stock inlet, it will come with
turbo, exhaust manifold, inlet manifold, dump to flange that finishes under passangers seat, brand new water/methanol setup cooling mist setup with all the bits to make it go and is setup to run 50% meth 50% water and is good for up to 150hp with the jetting but u can buy bigger jets if needed, elec fuel pump and fuel pressure reg set at 3.5psi but is changable up to 7psi, all water lines and oil lines minus sump, fuel pressure gauge and boost gauge, 1 3/4 inch su that was new when put on this setup,
this setup is needing a dizzy to be modified or locked and it will bolt on, finish the water meth wiring and a tune and will be a fast upgrade, most of the hard work is already done, no thanks to tommoz's anything mechanical in Hastings, ( there's a plug for ya Tommo)
pics are in my project tread if u want to look or pm and I can post more, open to offers but keep in mind that in parts alone I've spent 1400 without labor, so u could grab a good setup cheap!!!
If doesn't sell here will be putting it on eBay in the next 2 weeks so be quick as it will go there
Posted on: 2011/3/5 3:59
Edited by supafatto on 2011/3/8 9:29:22
|
Transfer
