fs is a s14/s15 t28 came with my motor, spins free little to no play with oil will be none, has small chip in rear wheel, size of match head.and broken stud which will come out with an easy out or drill!
will be good for a series turbo setup.
looking around ?? Dunno now! with oil and water hard lines and banjo bolts as they are hard to get

Model numbers are
14411-75f00
466543-1b

Attach file:

---

  photo 3(4).JPG (79.91 KB)


  photo 4(4).JPG (93.45 KB)

Is it a single turbo off a twin turbo engine (ceramic turbine)?

Yes simon that it's a ceramic wheel not steel! R33 gtr n1's are the only steel wheeled factory gtr turbo from factory as is the Jap spec s15 auto only t28

Thanks for that. If the compressor wheel is spot on, i`ll take it.

Front wheel on inlet is very good but the rear wheel has a little chip out of the corner of one fin! Can take better pics! But if your going to rebuild it Itll be perfact! Only reason I'm selling is I bought a Jap spec t28 ball bearing

I`ll be rebuilding it with a new shaft/turbine. Im puting a couple of turbo a12`s together. They are a good size for an A series streeter.

Good from 3500 and make great power.

EDIT: Ive just been looking at the pics again. It actually looks larger than a single turbo form a twin turbo skyline. I might have to get you to measure both wheel diameters.
Cheers.

Will do simon, I'll get measuring tool out when I get home! I'll let you no, cheers nick!

Lucky he's got a small tool simOn

yea i dont thinks its a gtr turbo its got .64 stamped on the turbine housing and 60 on compressor, gtr turbo have a .45 turbine housing and 42 compressor i think, still a good price

I'll measure it it may be a sr20 t28 or gtir t28