I know this has been spoken Bout plenty of times, but I tried searching and couldn't find exactly what I was after..

Will 15x8 with a +25 offset for on a 1200 ute? Just needs know ASAP as I'm holding on a set of wheels,
Thanks

Try this

Offset Calculator

you need backspace around 110mm-120mm

width of wheel 8 inches... thats wide...whats min tyre width?

Ive got 15 x 8 rota rbs with 195 55s on the back of my 1200 ute with factory tubs, not sure what offset you need as i am running shortened r31 diff thats shorter than a 1200 diff.

Dat82- yeah I've got shortened r31 diff also. Back I don't reckon will be much of an issue it's more the front I'm worried about, what are you running on the front?

Rallycar- yeah just tried that and specs showed a backspace of 140mm (5.5") :S

well at least that gets you into bolt on spacer territory.... but its not an ideal situation thats for sure

My diff is 1cm shorter each side than a standard 1200 diff so i am running with a offset of +4 on the back, i am running r31 front struts and have got +30 offset rims which just clear the calipers , i ve got 185s on the front but they are just scrubbing on the inside of the gaurd so i am gunna give 175s a go and raise up the front coilovers a bit

is that on an 8 inch rim on the front? gonna have some serious strecth with 175?

sorry the fronts are 15 x 7s