User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users



Topic options
Rate Thread
View mode


darrenwilson
Pistons??
#1
Home away from home
Joined:
2009/10/13 21:28
From Trinidad and tobago
Group:
Registered Users
Posts: 895
Offline
Hey Boys an Girls!

I have a question.I Have a 15 Pistons,Since they are Low Compression..and I put a14 Piston Top on a15 Rods Because a14 is High compression..

What would i Gain or loss?change in compression ??
Cheers Darren.

Posted on: 2012/8/15 1:58
_________________
'71 Four Door Sedan.
A15 Engine + Lighten Flywheel.
E15 Electronic Ignition 32/36 Weber EI Coil 4 into 2 into 1 Extractors 1 3/4 Exhaust Pipe Semi Flow Hotdog 60 series Gearbox H150 Diff.

Street Sleeper!

STILL LIVIN' THE 70'S LIFE !!
Transfer the post to other applications Transfer


Dundee1000
Re: Pistons??
#2
No life (a.k.a. DattoMaster)
Joined:
2003/2/10 5:17
From Freo
Group:
Registered Users
Posts: 3318
Offline
they will stick out the top of the block unless you get them machined...

Posted on: 2012/8/15 3:36
_________________
'68 Thou Wagon,(home now) up and running
'69 2 door project, the yellow thing,
A12A Project motor, for the yellow thing.
A15 PSI Project Motor
'72 CB750k,
Transfer the post to other applications Transfer


A14force
Re: Pistons??
#3
No life (a.k.a. DattoMaster)
Joined:
2003/12/3 7:56
From Christchurch NZ
Group:
Registered Users
Posts: 3706
Offline
You're better off to use Mazda/ford laser E5 pistons. They will need the small end of your conrods opening up to take them, but with a small deck cut on your block you'll get a good hike in compression.

Posted on: 2012/8/17 8:23
_________________
Forced Induction!
Because everyone knows you don't bring a knife to a gunfight!
Transfer the post to other applications Transfer


D
Re: Pistons??
#4
No life (a.k.a. DattoMaster)
Joined:
2002/10/28 6:49
From under the Firmament LOL no twiglight effect BS
Group:
Registered Users
Posts: 10926
Offline
all of the above yes but also if you have the a14 pistons machined to clear the valves then you get high comp in the best way possible.
Or you can buy some of peters forged pistons for cheap he advertised them recently, very high comp with valves recesses already done.

Posted on: 2012/8/17 10:01
_________________
"Australia" is formed by all its geographically listed territories "including" Norfolk, Christmas & Cocos Islands. The word include excludes all else before it therefore you have no legal rights.
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]